Results 1 to 9 of 9

Thread: Goalie equipment help

  1. #1

    Goalie equipment help

    My son has been an ice hockey goalie for 5 years, he wants to play Inline during the summer months, this is all new to me, I was hoping for some help. Does he wear his regular ice hockey pads, seems to me if he does that they would stick to the playing surface. Help!!!!!

  2. #2

    Re: Goalie equipment help

    Quote Originally Posted by hockeymom2 View Post
    My son has been an ice hockey goalie for 5 years, he wants to play Inline during the summer months, this is all new to me, I was hoping for some help. Does he wear his regular ice hockey pads, seems to me if he does that they would stick to the playing surface. Help!!!!!
    Can I ask what surface he'll be playing on? (concrete, tiles, melted ice rink, street, etc.?)
    Mike Burke
    Executive Director - ECRHA
    Managing Partner - Power Play Stats

  3. #3

    Re: Goalie equipment help

    He will be playing on both concrete and tile surfaces.

  4. #4

    Re: Goalie equipment help

    If it's smooth concrete and he's very comfortable with his pads he may want to look into pad covers.

    He could also try Mission Heliums - example here - http://www.inlinewarehouse.com/hockey.html?from=ihc

    If he's playing on a surface similar to asphalt, none of those are good options and he'll need a pair of pads designed specifically for street hockey.
    Mike Burke
    Executive Director - ECRHA
    Managing Partner - Power Play Stats

  5. #5
    Join Date
    Nov 2002
    Location
    El Paso, Tx
    Posts
    897

    Re: Goalie equipment help

    level of play might also be relevant...when I stand-in as keeper in our local rec league, I just wear my skater shins and some little kid ball hockey foam/vinyl leg pads right over 'em...the lightness really aids agility. I have also worn a set of football girdle and thigh pads rather than the regular goalie pants, again, greater lightness and freedom of movement being the result

    Ice pads are perfectly acceptable. Dependent upon the surface, you might sew some patches of polyethylene plastic sheeting onto the inside/outside foor/friction places. This would enable the pads to slide across the higher friction surfaces.

    A lot of guys just wear the same pads regardless and develop ways to move laterally that limit contact of the pads with the surface...my lateral movement is dismal anyway, so this doesn't matter much to my game in goal.

    Good luck, have fun...thank you on behalf of the entire inline community for coming out to play...we are very glad that you want to join us.

  6. #6

    Re: Goalie equipment help

    Quote Originally Posted by MBurke View Post
    If it's smooth concrete and he's very comfortable with his pads he may want to look into pad covers.

    He could also try Mission Heliums - example here - http://www.inlinewarehouse.com/hockey.html?from=ihc

    If he's playing on a surface similar to asphalt, none of those are good options and he'll need a pair of pads designed specifically for street hockey.
    You mentioned pad covers, where could I look into those?

  7. #7

    Re: Goalie equipment help

    you mentioned pad covers, where could I either get or find out about them?

  8. #8
    Join Date
    Nov 2006
    Location
    Mechanicsburg, Pa
    Posts
    94

    Re: Goalie equipment help

    I use a ice pad for inline and the only thing I changed was I put nylon duct tape on the inside part of the pads(the area where it hits the floor) and learn to slide more on your cowling's of your goalie skates. Doesn't come close to ice, but being a true butterfly goalie, I had to adjust for roller.

  9. #9

    Re: Goalie equipment help

    Pad covers have become somewhat harder to find. What type of pad does he currently have?

    For what it's worth, I use ice pads on Sportcourt with slide plates that I made for myself:







    I made them somewhat removable (the velcro is still there). They work really well. If you want to try this on your own, I can give you the info you'll need.

    If he's worried about destroying his pads and you don't feel like dealing with all of this hassle, your best bet may be to just buy a cheap set of Mission Helium Lites for ~$200, as MBurke said (http://www.inlinewarehouse.com/descp...l?pcode=MHLLP).
    Justin Brennan

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •